Flat Patterns

 

Methods Home

Flat Pattern setup for Elevator Scissor Right Side Hard Point.

 

 

 

IMG_1941

Cardboard template, “Floor” traced from the Rhino 1:1 Print out, offsets for attachment flanges created via a graphic ruler.

IMG_1940

Card Board Template transferred on to Plastic Transfer Flat Pattern, Sharpie Inc setup to go on the opposite side that the layups will make contact with.

IMG_1942

overview shot showing the Hardpoint about to get laid up, Cardboard Template, Plastic Flat Pattern, and Fiberglass Blank.

IMG_1946

 

85

End result shown on Rhino detail model, Hard Point attaches 3 hole bearing pivot.

Advertisements